Guides
Practical guides to the car battery: what to do when the car won't start, why the battery keeps dying and how to prepare it for winter. Where we can, we show real measurements from cars QZ monitors in everyday use.
Diagnosis, jump-starting, charging and why it happened.
Five causes and how to recognise yours from the voltage.
Why a parked car drains its battery, with real measurements.
Bluetooth, a charger with an app or 4G: which one suits your car.
What 12.6 V, 12.4 V or 12.0 V means and how to measure it properly.
Charge, maintain or disconnect — what battery makers recommend.
When a charger is enough, when remote monitoring helps, and when you want both.
When a jump starter helps, when an early alert helps, and why neither charges the battery.
Clamp order per the carmakers, what to do after the start, and which leads to buy.
How many years it lasts per ADAC and battery makers, and what shortens it.
The terminal order per ADAC and what may be lost after reconnecting.
How to see the battery's state on your phone when you are far from the car.
What a cheap Bluetooth monitor can and cannot do.
What QZ measures, what it does not, and the limits of voltage alone.
Step by step, how long it takes and charging it in the car.
What it is, how it differs from EFB, what to fit and how to charge it.
The figures from our own cars come from vehicles QZ monitors in everyday use. The unit is connected directly to the 12 V battery terminals and measures the voltage at regular intervals, also while the car is parked. We read the resting voltage only several hours after driving or charging. This is not a workshop test: QZ does not measure capacity or cranking amps. The full measurement methodology →